|
| A summer house in semi-tropical Sao Paulo |
 |
This summer house, by Andrade Morettin, is situated at a few metres from the sea, on the north coast of the State of São Paulo, a place with exuberant vegetation and hot humid climate. The project began with the idea of a big shelter, a “shell”, under which they could locate the programme and protect from the intense sun and frequent rains, without blocking the permanent natural cross ventilation. This roof measuring six metres high, with a surface of eighteen by eight metres, was built using a prefabricated timber structure with galvanized steel joints. The lateral and top faces are made of steel cladding with EPS filling.
In the two large facades of the house, generously open to the scenery, panels of glass fiber mosquito screens with PVC coating were installed, pivoting or sliding, with the intention of creating an external membrane, capable of keeping the insects out, without creating an obstacle for the ocean view and wind. The whole structure is elevated 75cm above ground level, supported by concrete pillars cast on site. All other components used in the construction are pre-fabricated and were simply mounted in place on the construction site. The adopted constructive system, besides reducing assembly time and errors, assured a dry construction site, with little generation of waste and low environmental impact. |
| Posted by: 3D-Archive | 28/03/2008 11:01 |
|
Login to Comment the Post
|
|
|
|
